XIAOMI

Redmi 6a & 6 Flash File ( dead Boot Repair )

November 17, 2024

Xiaomi Redmi 6A may called with other names like M1804C3CG M1804C3CH, M1804C3CI, M1804C3CE, M1804C3CT, M1804C3CC. China ROM, Firmware is for China region, there are only English, Chinese and No Google Services. Global ROM, Firmware is for Global region and almost can flash for China phone with unlocked bootloader. They have multilanguage and Google Services, china apps removed. All file download from MiFirm is Free. Fastboot firmware, ZIP firmware is official from Xiaomi. EU ROM, TWRP and Other files is unofficial. Use at your own risk

Steps to Flash Redmi 6A

1. Install MTK USB Drivers

Download and install the drivers to ensure your PC can communicate with the phone in flash mode.

2. Extract SP Flash Tool and Firmware

Extract the SP Flash Tool and the downloaded firmware files to separate folders on your PC.

3. Load Firmware into SP Flash Tool

Open the SP Flash Tool application.
Click on “Scatter-loading” and navigate to the folder where the firmware is located.
Select the scatter.txt file (usually located in the firmware folder).

4. Select Flashing Options

In SP Flash Tool, ensure the appropriate options are selected:
- For a clean flash, select Download Only or Firmware Upgrade.
- Avoid using Format All + Download unless you know what you’re doing, as it might erase essential partitions like IMEI.

5. Prepare the Phone

Turn off the Redmi 6A and disconnect it from the PC.
If possible, remove the battery (if removable).

6. Begin Flashing

In SP Flash Tool, click Download (green arrow).
Connect the Redmi 6A to the PC using the USB cable while holding down the Volume Down or Volume Up button (this depends on your device).
SP Flash Tool will detect the phone and begin flashing automatically. Wait until the process completes.

7. Completion

Once you see a green checkmark, the flashing process is complete.
Disconnect the phone and power it on.

Troubleshooting

SP Flash Tool Not Detecting Phone:
- Ensure MTK drivers are installed correctly.
- Try a different USB port or cable.
- Hold the appropriate key combination (Volume Up/Down) while connecting the phone.
Flashing Stuck or Fails:
- Ensure you downloaded the correct firmware for your device model.
- Recheck the scatter file path.
- Restart SP Flash Tool and try again.
Bootloop After Flashing:
- Boot into recovery mode (Power + Volume Up) and perform a factory reset.